Innotech Maxim Manual do Utilizador descarregar pdf (Página 32)

MAXIM Installation Instructions

Page 32 © Mass Electronics Pty Ltd 2011Edition 2.0 dated 20/11/2013

3-3.2 MiniMAX Controllers (MM01 / MM02)

This section of the manual provides wiring information for the MiniMAX MM01 and MM02 controllers.

Information is provided on wiring a power source and all associated inputs and outputs.

The general layout of the input and output terminals for each of these controllers is illustrated in

Figure 3-7 below.

3-3.2.1 Power Input

The MiniMAX controllers are powered by a 24V AC power source. The operating voltage must meet the

requirements of Safety Extra Low Voltage (SELV) to EN60730. The transformer used must be a Class 2

safety transformer in compliance with EN60742 and be designed for 100% duty. It must also be sized

and fused in compliance with local safety regulations. Power input specifications for the MiniMAX

controllers are detailed in Table 3-5 below.

Figure 3-7: MiniMAX (MM01 & MM02) Controller Terminal Connection Layout

Table 3-5: MiniMAX Power Source Specifications

Power Source Rating

24 VAC ±10%, 50/60 Hz, Nominal Transformer rating with maximum TRIAC load: 35VA

24 VAC ±10%, 50/60 Hz, Nominal Transformer rating with no TRIAC load: 10VA

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

Sem comentários

Innotech Maxim Manual do Utilizador Página 32