Innotech eServer Manual do Utilizador descarregar pdf (Página 82)

eServer Setup and Site Installation Instructions

Page 82 © Mass Electronics Pty Ltd 2009Edition 5.0 dated 07/01/2014

Figure 4-11: Example Device Properties for Connection 1, Device 1

4-2.6 Set iComm Connection Properties

Once your iComm Server Settings are correct, select each Device and check the internal Device

Settings correspond correctly with the iComm Server, as illustrated below in Figure 4-11, Figure 4-12

and Figure 4-13.

Figure 4-12: Example Device Properties for Connection 2, Device 1

Figure 4-13: Validate your Device Settings with the iComm Server

You can import devices and points to an iComm Server in the Points Manager. Right click on the iComm Server and

select Import Points to locate and import from a valid Genesis or MAXIM conguration le.

NOTE

The most cricital item on this window is the Remote Device Name Field, which uses the format [iComm Server

Connection ID]:[Device ID]. So for a device at address 1 on iComm connection 1, its correct Remote Device Name

Field would be 1:1

IMPORTANT

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 117 118

Sem comentários

Innotech eServer Manual do Utilizador Página 82